32-bit PIC® MCUs

This Protoshield kit from NKC Electronics is a great way to expand your chipKIT™ Uno32™. Develop your custom circuits on a solder-less breadboard. Once the circuit is tested and ready, install it on a Protoshield for a permanent solution, and free up your breadboard for the next project. Basic soldering experience is required. (Note: breadboard and soldering iron are not included.) Features include:

• All Uno32 signals and power lines available with standard headers
• Power indicator LED with resistor and filtering capacitor
• Two power buses are jumper selectable (5V or GND)
• DIP-oriented and general-purpose prototyping areas available
• Multiple shields can be stacked on top of chipKIT Uno32

Assembly instructions are available at http://www.chipkit.net/nkc-protoshield-uno32

NKC Electronics is a trusted Third-Party Tool provider.

 

The chipKIT Fubarino® Mini is a prototyping-friendly platform for developing Arduino compatible 32-bit applications. Compact size (5.1 cm x 1.9 cm) and low cost allow the Mini to fit almost anywhere. Includes USB bootloader that works with the chipKIT/MPIDE platform. Connect directly to your application using solder pads, or add the male expansion headers and plug into a breadboard. Features include:

• PIC32MX250F128D with 128K Flash, 32K RAM @ 48 MHz
• Up to 33 Digital IO (normally 27 are available)
• Includes headers for easy mounting on a breadboard
• Supports Peripheral Pin Select (demo code available)
• Includes pads for 32 KHz crystal
• ICSP header for optional programmer/debugger
• Can be powered through USB, or 2.8V to 13V DC input power
• USB cable included

Fubar Labs and Schmalz Haus LLC are trusted 3rd Party Tool providers

The chipKIT™ DP32™ is the first chipKIT rapid prototype project board from Digilent (410-280). The board adds the power of the Microchip PIC32MX250F128B with a prototyping area in a single board.

Features include:

Microchip PIC32MX250F128B microcontroller (40/50 MHz 32-bit MIPS, 128K Flash, 32K SRAM)

15V maximum input voltage

19 available I/O pins

Nine analog inputs

Potentiometer connected to an analog input

Four user LEDs

Two user push buttons

Prototyping area

Digilent is a trusted third-party tool provider.

chipKIT™ uC32 by Digilent (410-254)  is an easy-to-use platform for developing microcontroller-based applications. ChipKIT uses a modified version of the original Arduino™ IDE for compatibility with existing code examples, tutorials and resources. Pin-compatible with many Arduino shields that can operate at 3.3V.

• PIC32M340F512H processor
• 512K Flash, 32K RAM
• Up to 80 MHz operating speed
• 42 available I/O lines
• USB or externally powered
• USB cable required for programming (not included)

This low-priced item is not eligible for academic discount.


Digilent is a trusted third-party tool provider.

The chipKIT Basic I/O Shield (Digilent 410-216) adds a variety of useful I/O devices to the chipKIT Uno32 or the chipKIT Max32. It provides simple I/O such as buttons, switches and LEDs, as well as more complex devices such as an I2C EEPROM, an I2C temperature sensor, and a 128x32 pixel organic LED graphic display.

• 128x32 OLED Graphic Display
• Digital temperature sensor
• 256kbit EEPROM
• 4 switches
• 4 push buttons
• 8 LEDS
• 4 Open drain transistor outputs
• Analog potentiometer

Note: Requires chipKIT Uno32 (TDGL002), chipKIT Max32 (TDGL003), chipKIT uC32 (TDGL017), or chipKIT WF32 (TDGL021).

Digilent is a trusted third-party tool provider.

chipKIT™ Max32™ by Digilent (410-202) is an easy-to-use platform for developing advanced applications. The chipKIT platform uses a modified version of the original Arduino^® IDE for compatibility with existing code examples, tutorials and resources. Pin-compatible with many Arduino shields that can operate at 3.3V.

• PIC32MX795F512L processor
• 512K Flash, 128K RAM
• Up to 80 MHz operating speed
• USB 2.0 OTG controller
• 10/100 Ethernet MAC
• Dual CAN controllers
• 83 available I/O lines
• USB or externally powered
• USB cable required for programming (not included)

Digilent is a trusted third-party tool provider.

The chipKIT Network Shield (Digilent 410-211) expands the capabilities of the chipKIT Max32 to take advantage of all the advanced features of the PIC32MX795 MCU. It adds 10/100 Ethernet, USB and CAN communications plus additional features.

• 10/100 Ethernet
• USB Host, Device, OTG
• Dual CAN transceivers
• Dual I2C connectors
• 245kbit EEPROM
• 32.768 KHz oscillator for RTCC

Note: Requires chipKIT Max32 (TDGL003)

Digilent is a trusted third-party tool provider.

The ExpLoRer LoRa Board for US/AUS (915 MHz) is an easy-to-use development board based on SAMD21 Cortex® - M0+ microcontroller. The board features RN2903 LoRaWAN module along with an RN4871 Bluetooth 4.2 BLE module. This small development board comes with two rows of standard headers for feature expansion and rapid prototyping. The SODAQ ExpLoRer board also includes a micro USB port for debug as well as for charging purposes.

The ExpLoRer LoRa Board for EU/IN (868 MHz) is an easy-to-use development board based on SAMD21 Cortex® - M0+ microcontroller. The board features RN2483 LoRaWAN module along with an RN4871 Bluetooth 4.2 BLE module. This small development board comes with two rows of standard headers for feature expansion and rapid prototyping. The SODAQ ExpLoRer board also includes a micro USB port for debug as well as for charging purposes.

The Mikromedia Board for PIC32 (MIKROE-597) fits comfortably in the palm of your hand and provides amazing multimedia capability. Based on the PIC32MX460F512L MCU, it includes a 320 x 240 TFT display with touchscreen, stereo codec, 8-Mbit serial flash, microSD card slot, headphone and microphone jacks, and a USB connector. Powered by USB, the board is capable of playing videos directly from a microSD card at 15 fps.

Examples and documentation are included for the MPLAB C compiler and the MikroElektronika compilers. Also supported by the Microchip Graphic Object Library. The board includes two programming ports: one for PICkit 3 and one for MikroEs mikroProg external programmer.

MikroElektronika is a trusted third-party tool provider.

The WCM (Wi-Fi Client Module) Kit 1 Powered by Exosite uses a Wi-Fi G based module driven by a 32 bit controller. This Internet of Thing (IoT) kit takes advantage of the new ExositeReady Software as a Service and is the first ExositeReady kit.
Exosite is a managed cloud platform that lets connected devices easily and securely interact with cloud applications and other devices. 

• For more information on Microchip's IoT solutions connected to Exosite please go to http://docs.exosite.com/exositeready/microchip/. 
• For up the up to date getting started guide at the following link : https://github.com/exositeready/er_vfp_microchip_wcm
• For the latest firmware please go to https://github.com/exositeready/er_vfp_microchip_wcm/releases

The chipKIT™ Pro MX7™ (Digilent 410-296) development board is based on the PIC32MX795F512L MCU. It is compatible with Digilent's line of Pmod™ peripheral modules and is suitable for use with the Microchip MPLAB^® IDE. This board is also compatible with the chipKIT™ platform's MPIDE development environment. The chipKIT platform and MPIDE are part of a PIC32-based system compatible with many existing Arduino^® code examples, reference materials, and other resources.

Includes a built in programmer/debugger compatible with MPLAB. The kit contains everything needed to start developing embedded applications using either the MPLAB IDE or the MPIDE.

• PIC32MX795F512L MCU
• 512K Flash, 128K RAM
• USB 2.0 Full Speed On-The-Go [OTG]
• 10/100 Ethernet
• Two CAN controllers
• 52 I/O pins
• 16 analog inputs
• chipKIT bootloader installed

This low-priced item is not eligible for academic discount.

Digilent is a trusted Third-Party Tool provider.

The IoT Ethernet Monitoring Kit powered by Medium One uses an Ethernet LAN8740A port driven by a PIC32MZ EF 32 bit controller. This kit natively support temperature, pressure, humidity, air quality and motion sensors and can be activated and deployed in minutes with zero programming required. The kit is preloaded with a fully functioning sensing application featuring cloud-defined edge processing, real-time monitoring, smart notification, reporting, analytics and dashboards.

It includes free cloud service, mobile app with an open reference design to easily customize and integrate into existing or new product designs and applications. The IoT Ethernet Monitoring kit powered by Medium One offers IoT solutions to enable real-time data rich applications in the cloud or on-prem.

Visit medium.one/microchip for more information about theThe IoT Ethernet Monitoring Kit powered by Medium One, getting started guide and firmware updates. For more information on Microchip's IoT solutions please go to microchip.com/iot.

Note the sensors will have to be purchased separately on our partner website mikroElectronika. Part number referenced on medium.one/microchip.