Starter Kits
Standard Pricing
Quantity
USD per Unit
DIGIPOT Click (MIKROE-923) is an add-on board in the mikroBUS™ form factor. It features a single-channel, digital potentiometer device (MCP4161) with 8-bit resolution (256 wiper steps) and the industry-standard SPI serial interface. The resistance value of the digital potentiometer goes up to 10 kΩ. This board features outstanding AC/DC characteristics and low-power consumption. It can be used in audio equipment, servo-motor control, battery charging and control, LCD contrast control, programmable filters, and more.
Note: mikroBUS is an expansion board format used on several development boards from MikroElektronika, including TMIK013, TMIK016, TMIK017, TMIK021, TMIK022, and TMIK023.
MikroElektronika is a trusted third-party tool provider.
DIGIPOT Click (MIKROE-923) is an add-on board in the mikroBUS™ form factor. It features a single-channel, digital potentiometer device (MCP4161) with 8-bit resolution (256 wiper steps) and the industry-standard SPI serial interface. The resistance value of the digital potentiometer goes up to 10 kΩ. This board features outstanding AC/DC characteristics and low-power consumption. It can be used in audio equipment, servo-motor control, battery charging and control, LCD contrast control, programmable filters, and more.
Note: mikroBUS is an expansion board format used on several development boards from MikroElektronika, including TMIK013, TMIK016, TMIK017, TMIK021, TMIK022, and TMIK023.
MikroElektronika is a trusted third-party tool provider.
Standard Pricing
Quantity
USD per Unit
DAC Click (MIKROE-950) is an add-on board in the mikroBUS™ form factor. It includes a 12-bit, Digital-to-Analog Converter device (MCP4921) that features an optional 2x buffered output and SPI interface. The board provides high accuracy and low-noise performance for industrial applications where calibration or compensation of signals such as temperature, pressure, and humidity are required. The board is set to use the 3.3V power supply by default. You may solder the PWR SEL SMD jumper to the 5V position for use with 5V systems.
Note: mikroBUS is an expansion board format used on several development boards from MikroElektronika, including TMIK013, TMIK016, TMIK017, TMIK021, TMIK022, and TMIK023.
MikroElektronika is a trusted third-party tool provider.
DAC Click (MIKROE-950) is an add-on board in the mikroBUS™ form factor. It includes a 12-bit, Digital-to-Analog Converter device (MCP4921) that features an optional 2x buffered output and SPI interface. The board provides high accuracy and low-noise performance for industrial applications where calibration or compensation of signals such as temperature, pressure, and humidity are required. The board is set to use the 3.3V power supply by default. You may solder the PWR SEL SMD jumper to the 5V position for use with 5V systems.
Note: mikroBUS is an expansion board format used on several development boards from MikroElektronika, including TMIK013, TMIK016, TMIK017, TMIK021, TMIK022, and TMIK023.
MikroElektronika is a trusted third-party tool provider.
Standard Pricing
Quantity
USD per Unit
RELAY Click (MIKROE-1370) is an add-on board in the mikroBus™ form factor. The board features two G6D1AASI-5DC power relay modules, screw terminals for connecting external loads up to 5A, 250V AC/30V DC, and on-board transistors to drive the relays.
Note: mikroBUS is an expansion board format used on several development boards from MikroElektronika, including TMIK013, TMIK016, TMIK017, TMIK021, TMIK022, and TMIK023.
MikroElektronika is a trusted 3rd Party Tool provider
RELAY Click (MIKROE-1370) is an add-on board in the mikroBus™ form factor. The board features two G6D1AASI-5DC power relay modules, screw terminals for connecting external loads up to 5A, 250V AC/30V DC, and on-board transistors to drive the relays.
Note: mikroBUS is an expansion board format used on several development boards from MikroElektronika, including TMIK013, TMIK016, TMIK017, TMIK021, TMIK022, and TMIK023.
MikroElektronika is a trusted 3rd Party Tool provider
PIC clicker (MIKROE-1487) is an amazingly compact starter development kit bringing the innovative mikroBUS™ host socket to your favorite microcontroller. Enhance it further by connecting the Click board of your choice. It comes preprogrammed with a fast USB HID bootloader. Just upload your firmware, and Clicker becomes a working device. This little board features all you need to get started: a PIC18F47J53 microcontroller, a USB connector, two LEDs and push buttons, a reset button, a programmer connector, and headers for interfacing with external electronics.
MikroElektronika is a trusted third-party tool provider.
PIC clicker (MIKROE-1487) is an amazingly compact starter development kit bringing the innovative mikroBUS™ host socket to your favorite microcontroller. Enhance it further by connecting the Click board of your choice. It comes preprogrammed with a fast USB HID bootloader. Just upload your firmware, and Clicker becomes a working device. This little board features all you need to get started: a PIC18F47J53 microcontroller, a USB connector, two LEDs and push buttons, a reset button, a programmer connector, and headers for interfacing with external electronics.
MikroElektronika is a trusted third-party tool provider.
Standard Pricing
Quantity
USD per Unit
Standard Pricing
Quantity
USD per Unit
ADC Click is an add-on board in the mikroBUS™ form factor (MIKROE-922). It includes a 12-bit Analog-to-Digital Converter (ADC) MCP3204 device that features 50k samples/second, 4 input channels, and low-power consumption (500nA typical standby, 2µA max). In addition, this board uses the industry-standard SPI communication interface. It is small in size and features convenient screw terminals for easier connections. By default, the board is set to use 3.3V of power. However, to use it with 5V systems, just place the PWR SEL SMD jumper in the 5V position.
Note: mikroBUS is an expansion board format used on several development boards from MikroElektronika, including TMIK013, TMIK016, TMIK017, TMIK021, TMIK022, and TMIK023.
MikroElektronika is a trusted third-party tool provider.
ADC Click is an add-on board in the mikroBUS™ form factor (MIKROE-922). It includes a 12-bit Analog-to-Digital Converter (ADC) MCP3204 device that features 50k samples/second, 4 input channels, and low-power consumption (500nA typical standby, 2µA max). In addition, this board uses the industry-standard SPI communication interface. It is small in size and features convenient screw terminals for easier connections. By default, the board is set to use 3.3V of power. However, to use it with 5V systems, just place the PWR SEL SMD jumper in the 5V position.
Note: mikroBUS is an expansion board format used on several development boards from MikroElektronika, including TMIK013, TMIK016, TMIK017, TMIK021, TMIK022, and TMIK023.
MikroElektronika is a trusted third-party tool provider.
Standard Pricing
Quantity
USD per Unit
STK600 routingcard for 20-pin Tiny416 and 14-pin Tiny414 in SOIC socket.
STK600 routingcard for 20-pin Tiny416 and 14-pin Tiny414 in SOIC socket.
Standard Pricing
Quantity
USD per Unit
Standard Pricing
Quantity
USD per Unit
Note: This Plug-in Module is not compatible with the Explorer 16/32 Development Board.
Note: This Plug-in Module is not compatible with the Explorer 16/32 Development Board.
Standard Pricing
Quantity
USD per Unit
Standard Pricing
Quantity
USD per Unit
Standard Pricing
Quantity
USD per Unit
The Curiosity Development Board includes an integrated programmer/debugger and is fully integrated with Microchip MPLAB® X IDE (integrated development environment) and PIC32's software integration framework MPLAB ® Harmony. The board offers expansion capabilities making it an excellent choice for a rapid prototyping board in USB, Hi-Resolution /Bluetooth Audio, BTLE and other general propose applications.
Package Contains:
- Curiosity PIC32MX470 Development Board
The Curiosity Development Board includes an integrated programmer/debugger and is fully integrated with Microchip MPLAB® X IDE (integrated development environment) and PIC32's software integration framework MPLAB ® Harmony. The board offers expansion capabilities making it an excellent choice for a rapid prototyping board in USB, Hi-Resolution /Bluetooth Audio, BTLE and other general propose applications.
Package Contains:
- Curiosity PIC32MX470 Development Board
Standard Pricing
Quantity
USD per Unit
KIT CONTENTS:
KIT CONTENTS:
Standard Pricing
Quantity
USD per Unit
Standard Pricing
Quantity
USD per Unit
Standard Pricing
Quantity
USD per Unit
- Microstick II Board
- USB cable
- 2 - 1x14 header pins for proto board use
- Device Samples
- Info Sheet with installation instructions and board schematic
- Microstick II Board
- USB cable
- 2 - 1x14 header pins for proto board use
- Device Samples
- Info Sheet with installation instructions and board schematic
Standard Pricing
Quantity
USD per Unit
The PIC32 Starter Kit contains everything needed to experience the high performance PIC32 microcontroller family. With over 35 source code examples, on-board programmer/debugger, free development tools and numerous design documents, your first program for a PIC32 MCU is just minutes away. The PIC32 Starter Kit includes an expansion header for adding Microchips Starter Kit expansion boards or for prototyping your own.
The CD is optional as newer versions of our starter kit come with download instructions.
The PIC32 Starter Kit contains everything needed to experience the high performance PIC32 microcontroller family. With over 35 source code examples, on-board programmer/debugger, free development tools and numerous design documents, your first program for a PIC32 MCU is just minutes away. The PIC32 Starter Kit includes an expansion header for adding Microchips Starter Kit expansion boards or for prototyping your own.
The CD is optional as newer versions of our starter kit come with download instructions.
Standard Pricing
Quantity
USD per Unit
GSM Click (MIKROE-1514) is an add-on board in the mikroBUS™ form factor. It is a perfect solution for adding a GSM/GPRS communication layer to your device. It features a Telit GL865-QUAD GSM/GPRS module which supports the GSM/GPRS 850/900/1800/1900 MHz Quad-band frequency. The board contains the TXB0106, a 6-bit bidirectional voltage-level translator, as well as a SIM-card socket. GSM Click communicates with the target microcontroller via seven mikroBUS™ lines RX, TX, INT, PWM, CS, RST and AN. The board can use either 3.3V or 5V of power. The LED diode indicates the presence of the power supply.
Note: mikroBUS is an expansion board format used on several development boards from MikroElektronika, including TMIK013, TMIK016, TMIK017, TMIK021, TMIK022, and TMIK023.
MikroElektronika is a trusted 3rd Party Tool provider
GSM Click (MIKROE-1514) is an add-on board in the mikroBUS™ form factor. It is a perfect solution for adding a GSM/GPRS communication layer to your device. It features a Telit GL865-QUAD GSM/GPRS module which supports the GSM/GPRS 850/900/1800/1900 MHz Quad-band frequency. The board contains the TXB0106, a 6-bit bidirectional voltage-level translator, as well as a SIM-card socket. GSM Click communicates with the target microcontroller via seven mikroBUS™ lines RX, TX, INT, PWM, CS, RST and AN. The board can use either 3.3V or 5V of power. The LED diode indicates the presence of the power supply.
Note: mikroBUS is an expansion board format used on several development boards from MikroElektronika, including TMIK013, TMIK016, TMIK017, TMIK021, TMIK022, and TMIK023.
MikroElektronika is a trusted 3rd Party Tool provider
Standard Pricing
Quantity
USD per Unit
GPS Click (MIKROE-1515) is an add-on board in the mikroBus™ form factor. Its a compact solution for adding GPS functionality to your device. It features the LEA-6S, high-performance u-blox 6 positioning engine. The board can interface with a microcontroller via UART or I2C, or data can be acquired using the PC application via USB. The board features a connector that is compatible with active and passive antennas. It can operate on 3.3V of power only.
Note: mikroBUS is an expansion board format used on several development boards from MikroElektronika, including TMIK013, TMIK016, TMIK017, TMIK021, TMIK022, and TMIK023.
MikroElektronika is a trusted 3rd Party Tool provider
GPS Click (MIKROE-1515) is an add-on board in the mikroBus™ form factor. Its a compact solution for adding GPS functionality to your device. It features the LEA-6S, high-performance u-blox 6 positioning engine. The board can interface with a microcontroller via UART or I2C, or data can be acquired using the PC application via USB. The board features a connector that is compatible with active and passive antennas. It can operate on 3.3V of power only.
Note: mikroBUS is an expansion board format used on several development boards from MikroElektronika, including TMIK013, TMIK016, TMIK017, TMIK021, TMIK022, and TMIK023.
MikroElektronika is a trusted 3rd Party Tool provider
Standard Pricing
Quantity
USD per Unit
Standard Pricing
Quantity
USD per Unit
Standard Pricing
Quantity
USD per Unit
Standard Pricing
Quantity
USD per Unit
Standard Pricing
Quantity
USD per Unit
Standard Pricing
Quantity
USD per Unit
The PIC32MX1/2/5 Starter Kit Can be interfaced with CAN BUS Analyzer tool (APGDT002) to develop and debug CAN BUS Network
The PIC32MX1/2/5 Starter Kit Can be interfaced with CAN BUS Analyzer tool (APGDT002) to develop and debug CAN BUS Network
Standard Pricing
Quantity
USD per Unit
Standard Pricing
Quantity
USD per Unit
Standard Pricing
Quantity
USD per Unit
Package contains:
Package contains:
Standard Pricing
Quantity
USD per Unit
Standard Pricing
Quantity
USD per Unit
Mature Product
Standard Pricing
Quantity
USD per Unit
This Starter Kit features a socket that can accommodate 10/100 Ethernet transceiver (RJ-45) plug-in connectors from various vendors for prototyping and development.
Package contains:
• PIC32MZ EF Starter Kit board
• PHY daughter board
• Ethernet patch cord
• Three USB cables (one Standard-A to Micro-B and two Standard-A to Mini-B)
This Starter Kit features a socket that can accommodate 10/100 Ethernet transceiver (RJ-45) plug-in connectors from various vendors for prototyping and development.
Package contains:
• PIC32MZ EF Starter Kit board
• PHY daughter board
• Ethernet patch cord
• Three USB cables (one Standard-A to Micro-B and two Standard-A to Mini-B)
Standard Pricing
Quantity
USD per Unit
This Starter kit features a socket that can accommodate 10/100 Ethernet transceiver (RJ-45) plug-in connectors from various vendors for prototyping and development.
Package contains:
• PIC32MZ EF Starter Kit board w/Crypto Engine
• PHY daughter board
• Ethernet patch cord
• Three USB cables (one Standard-A to Micro-B and two Standard-A to Mini-B)
This Starter kit features a socket that can accommodate 10/100 Ethernet transceiver (RJ-45) plug-in connectors from various vendors for prototyping and development.
Package contains:
• PIC32MZ EF Starter Kit board w/Crypto Engine
• PHY daughter board
• Ethernet patch cord
• Three USB cables (one Standard-A to Micro-B and two Standard-A to Mini-B)
Standard Pricing
Quantity
USD per Unit
The board demonstrates these features of the PIC24FJ128GC010 Microcontroller: direct LCD drive, 16-bit Sigma-Delta ADC, 12-bit Pipeline ADC, 10-bit DAC, Op-Amps, CTMU, DMA, USB, and XLP low power consumption.
The demonstration code includes: LCD display including scrolling text with icons, Sine wave audio output, Light Sensor, Temperature Sensor, Resistive Sensor, Watch Crystal based Time display, mTouch ™ User Input Control with Visual Feedback, Bar Graph display of sensor and microphone input, and data logging of 16-bit ADC data to USB drive. The board also features an analog connector designed to insert into a breadboard for easy access to analog peripherals, and an expansion area for adding RF connectivity.
The kit includes: Starter Kit
The board demonstrates these features of the PIC24FJ128GC010 Microcontroller: direct LCD drive, 16-bit Sigma-Delta ADC, 12-bit Pipeline ADC, 10-bit DAC, Op-Amps, CTMU, DMA, USB, and XLP low power consumption.
The demonstration code includes: LCD display including scrolling text with icons, Sine wave audio output, Light Sensor, Temperature Sensor, Resistive Sensor, Watch Crystal based Time display, mTouch ™ User Input Control with Visual Feedback, Bar Graph display of sensor and microphone input, and data logging of 16-bit ADC data to USB drive. The board also features an analog connector designed to insert into a breadboard for easy access to analog peripherals, and an expansion area for adding RF connectivity.
The kit includes: Starter Kit
Standard Pricing
Quantity
USD per Unit
For additional board information, documentation and downloads, please CLICK HERE
For additional board information, documentation and downloads, please CLICK HERE
Standard Pricing
Quantity
USD per Unit
Standard Pricing
Quantity
USD per Unit
This Starter Kit features a socket that can accommodate 10/100 Ethernet transceiver (RJ-45) plug-in connectors from various vendors for prototyping and development.
Package contains:
• PIC32MZ DA Starter Kit board
• LAN8740 PHY daughter board
• Ethernet patch cord
• One Standard-A to micro USB cable
This Starter Kit features a socket that can accommodate 10/100 Ethernet transceiver (RJ-45) plug-in connectors from various vendors for prototyping and development.
Package contains:
• PIC32MZ DA Starter Kit board
• LAN8740 PHY daughter board
• Ethernet patch cord
• One Standard-A to micro USB cable
Standard Pricing
Quantity
USD per Unit
This Starter Kit features a socket that can accommodate 10/100 Ethernet transceiver (RJ-45) plug-in connectors from various vendors for prototyping and development.
Package contains:
• PIC32MZ DA Starter Kit board
• LAN8740 PHY daughter board
• Ethernet patch cord
• One Standard-A to micro USB cable
This Starter Kit features a socket that can accommodate 10/100 Ethernet transceiver (RJ-45) plug-in connectors from various vendors for prototyping and development.
Package contains:
• PIC32MZ DA Starter Kit board
• LAN8740 PHY daughter board
• Ethernet patch cord
• One Standard-A to micro USB cable
Standard Pricing
Quantity
USD per Unit
Standard Pricing
Quantity
USD per Unit
This Starter Kit features a socket that can accommodate 10/100 Ethernet transceiver (RJ-45) plug-in connectors from various vendors for prototyping and development.
Package contains:
• PIC32MZ DA Starter Kit board
• LAN8740 PHY daughter board
• Ethernet patch cord
• One Standard-A to micro USB cable
This Starter Kit features a socket that can accommodate 10/100 Ethernet transceiver (RJ-45) plug-in connectors from various vendors for prototyping and development.
Package contains:
• PIC32MZ DA Starter Kit board
• LAN8740 PHY daughter board
• Ethernet patch cord
• One Standard-A to micro USB cable
Standard Pricing
Quantity
USD per Unit
Standard Pricing
Quantity
USD per Unit
The ATSTK521 board is a hardware expansion moduel, supporting AT90PWM81, for the STK500 Starter Kit.
The ATSTK521 board is a hardware expansion moduel, supporting AT90PWM81, for the STK500 Starter Kit.
Standard Pricing
Quantity
USD per Unit
Programs all AVR devices.
Programs all AVR devices.
Standard Pricing
Quantity
USD per Unit
Mature Product
The J-Link BASE Debug Probe is a USB-powered in-circuit debugger supporting PIC32 devices. Based on a 32-bit RISC CPU, it can communicate at high speed with supported target devices. J-Link is a great tool for flash programming and debugging in development and production environments. Note: J-Link is fully supported in MPLAB X IDE v2.15.
Features include:
- USB-powered and plug-and-play compatible
- Direct download into flash memory
- Download speed up to 1 MByte/second
- Unlimited breakpoints in flash memory
- Remote Server included allowing use of J-Link remotely via TCP/IP
- Supports JTAG chains with multiple devices
- Cross-platform support Windows, Linux, Mac OS X
- SDK available
SEGGER is a trusted third-party tool provider
Note: An adapter cable is available to connect SEGGER J-Link to RJ11 connectors, it's available from SEGGER's website:
The J-Link BASE Debug Probe is a USB-powered in-circuit debugger supporting PIC32 devices. Based on a 32-bit RISC CPU, it can communicate at high speed with supported target devices. J-Link is a great tool for flash programming and debugging in development and production environments. Note: J-Link is fully supported in MPLAB X IDE v2.15.
Features include:
- USB-powered and plug-and-play compatible
- Direct download into flash memory
- Download speed up to 1 MByte/second
- Unlimited breakpoints in flash memory
- Remote Server included allowing use of J-Link remotely via TCP/IP
- Supports JTAG chains with multiple devices
- Cross-platform support Windows, Linux, Mac OS X
- SDK available
SEGGER is a trusted third-party tool provider
Note: An adapter cable is available to connect SEGGER J-Link to RJ11 connectors, it's available from SEGGER's website:
Standard Pricing
Quantity
USD per Unit
Get Help